Zhejiiang Kaiji Automobile Spare Parts Manufacture Co.Ltd,Yiwu Kaiji,Automobile Spare Parts Manufacture,Kaiji auto parts

NEWS LIST

Zhejiiang Kaiji Automobile Spare Parts Manufacture Co.Ltd
Add:Spring Han 121 road,Yiwu City,Zhejiang provincial
Contact:Mr.Luo
Domestic market:0086-579-85262391
Office:0086-579-85262393
Fax:0086-579-85262185
Abroad:0086-579-85262390
Fax:0086-579-85262187
E-mail/MSN:kaiji_auto@hotmail.com
Website:www.kaiji1.com

You Are Here：Home > Industry

Car coating technique and maintenance of your paint

New car, the most easy to damage is the paint. Casual rub touch, or wash the car is not careful, the paint will be damaged. General minor abrasions, wounds whitening paint surface. It was the paint that was scratched, but it was not exposed, so it was not necessary. Polish or more than a few times a wax, scratches will slowly disappear.
If you can see the color of the primer, then look at the site of the scar. In general, the bumper, the rear view mirror and some of the wheel of the wheel is the engineering plastic, will not rust. There is no big problem except for the ugly. Repair paint owners to see it my request. But if these severe wounds appear in other parts of the body, it will need to fill the paint, otherwise even if it is a very small damage, the steel will start to rust, at that time, even if the paint is also very difficult to rust.
Paint also to select the qualified professional paint factory. Not skilled paint, no clean high-temperature paint shop, it is impossible to obtain a satisfactory spray effect. In addition to remind everyone is, do not believe that some of the so-called maintenance companies advertised the so-called original paint repair, it is not possible. The reason is very simple: the original painting process is to experience 200 degrees of high temperature baking. If the process of such a car to fill paint, the car is afraid of which parts can not afford. Therefore, the paint used up paint is specialized for low temperature baking, with the original paint is not the same.
Secondly, the color of the paint is to repair the pre deployment of the. The reason has been mentioned in the front, according to the length of time, the car's paint has begun to fade, and completely dependent on the original car factory when the color paint, will produce a clear color. To want to try and the vehicle's current color matching, can only be present. In addition to the best possible no color, even if only a small piece of the body need to fill the paint, maintenance personnel will also be associated with the body of all re spray. For example, there is a need to fill the door on the door, then the maintenance plant will tend to be in case of wiping the boundary, the upper half of the fan or the lower half of the door full spray. As a result, if there is a slight color difference is not easy to see.
This clever maintenance paint
Is not to say that the effect of the paint is not good, but the most perfect condition of nature is a former factory paint, only this can really achieve the full car no color, as well as the manufacturers claim to rust standards. In order to make the original bright visual effect lasting paint, not owners careful maintenance care.
Although the car wash the comparative costs of water, but in order to save, with a bucket of water began to wash the car, not only cleaning effect impossible satisfactory, to paint will produce serious harm -- car paint dust due to the lack of flushing on the body repeated friction, that almost with a piece of sandpaper grinding paint amounts. If you have a rain or dust, don't drag or dust the dust. Just wash the car.
In washing process, with plenty of water to rinse the body it is undoubtedly necessary, but many times, not after the car wash industry and trade professional training in order to obtain greater flushing strength, like used water cannons vertical shooting at the body and the high pressure water is likely to cause damage to the paint.
In view of the current manufacturers of fashionable low inventory policy, the new car may not come out a few days from the production line. The baking features, generally for a period of time after the completion of really strong, hard. So, don't rush to wax the car, three months later. Three months later also try not to use hard wax.
Also, the majority of new color paint is sprayed with a layer of varnish, paint, natural light good-looking, also can protect the paint. And the market propaganda especially in high spirits of the glaze, coating is to polish the varnish layer as the price, maybe they can give you the car to bring short-term light, but it is worth?
It sprayed all the most shocking
Unless used car parked in the garage never go out, as long as the cars on the road after years of use, the inevitable to paint the wear and aging. Due to the decline in the quality of vehicle paint, the paint repair or maintenance can not solve the problem of local. Want to get back to the new time of the new car, such as the feeling that the only way is probably the whole car spray paint.
The whole car spray paint is a test technology to test the patience of the live, any point of laziness or negligence will directly affect the vehicle spray paint effect.
First by every detail of the sheet metal workers check the body, as the case to modify debug; an electrician check debugging car lights, then demolished all; also tinbender but also the dismantling of all external body all decoration strip, door handle, glass, signs, and do a good job in the carriage protective measures so as not to be flying paint contamination. In order to achieve the best spraying effect, metaler to body surface leveling repair, and will completely remove the old paint.
Putty is a car painted for the essential working procedure, putty, sanding, putty, again burnish, so repeated several times until the body is completely flat so far. After the putty after the car can enter the paint room, paint spray paint and baking finish even after spraying varnish is varnish. As for advance has been removed large parts such as the hood, bumpers, etc. are carried out simultaneously with similar work. Plastic parts such as bumper are sprayed with plastic primer before spray paint, and the paint is also added to ensure the adhesion and strength of the paint. After all the spraying is carried out, it is a large-scale assembly and debugging, and the painter to the body surface for the final polishing and polishing. After inspection of the vehicle spray paint renovation work end. At this time, the car is like a "pass" first day as bright as new, the owner of the mood is "excited" to describe.
By the way, if inconsistent with the original car whole car paint color, the owner must as soon as possible to the Che Kwun submitted body color change of registration application.
[Next] [Back]